Like the real Beechcraft G58 with Garmin GFC 700 autopilot and Garmin G1000 NXi

Beechcraft G58, real brochure

Beechcraft G58 with winglets, real example

 

New with v2.0

Garmin 1000 sounds like the Cessna G1000 from Laminar.

Modular zips. All sections can be downloaded separately. 

 

New with v1.9

New panel menu with buttons adapted to G58 real version. Now with YD (Yaw Damper) button near AP button.

With this version I've added warning and caution messages into G1000 PFD, like the real Beechcraft G58.

new panel g58

 

 

New with v1.8

Now with new Airfoils and new flaps parameters, lift coefficient (CL) drag coefficient(CD) and pitching moment (CM) revised and improved.

Airfoils tested using XFLR5 and exported and scaled with Polar2Afl. Airfoils data are much more accurate than the default B58 uses. Thanks to Zeta (Alejandro Zuluaga) for this work!

What is an Airfoil: An airplane's wing has a special shape called an airfoil. The airfoil is shaped so that the air traveling over the top of the wing travels farther and faster than the air traveling below the wing. ... According to the Bernoulli Principle, this pressure differential pushes the airplane upward, giving it lift.

 

Improvements over the default version:

Avitab integration. New Avitab display, now more realistic with dirt.

G1000 version based on Miniwebbs 3D object and fully improved and fixed with all new parameters.

I have taken the opportunity to solve all the flight problems of this model also adding the improvements of MGouge version. 

I have added and reviewed one by one all the flight parameters in Plane Maker so that the flight mode is fully compatible with the new Austin flight mode.

I have designed two new winglets for the wings of our favorite plane. I hope you like them because it gives a new, much more modern design. There is a lot of work with Blender!

I have also designed a new interior with a new cabin, with new materials. Now the seats look better.

The pilots' seats have a new finish and look more like the real ones.

The cabin overhead lights in the passenger area are now real. They activate automatically when there is little light and turn off during the day.

The cockpit also includes new improvements. Now everything is made of steel and the materials better reflect light. I have added new controls to the altitude and artificial horizon indicators so that they can be selected from the co-pilot area. Now the Prop Amps gauge works again! Speed indicator: now there is corelation between analog and digital speed indicator with concern to the yellow ark. New compass with more legibility, do you like Cessna?

Better taxi and landing lights. 

New version without winglets (with and without winglets into the same pack).

New prop disc with more realistic graphics.

Autopilot Garmin GFC 700 like real Beechcraft G58, with Garmin G1000 NXi

AP Heading AHRS

Altitude alert approaching 1000 feet from pre-select

Altitude alert departing 200 feet from select

Auto adjust CDI to GPS DTK (pilot and copilot)

FSEconomy alias added

3jCabin-sounds with some optimized ranges

G1000 alt inner knob works down and up

Autopilot VVI select step size = 100 ft

Autopilot altitude select step size = 100 ft

Radio altitude select step size = 100 ft

Altitude pre-select is always armed

Checklist included in clist format for XChecklist plugin.

And more and more...

 

 

 

SPECIALLY DESIGNED FOR VR  

I have improved all the clickable areas of the cockpit adjusting them better to the area of textures. Before they were very forward and now they are right where they should be. Now it is handled perfectly from VR.

Speaking of VR, everything has been tested in Virtual Reality and it must be said that the new B58 is extremely good in FPS. By the way, I have touched up the vrconfig file so that the points of view of the pilot, co-pilot and passengers are the best possible.

 

Some tips:

About liveries you can use all of the B58 standard designs, because this Baron G58 is 100% compatible with Laminar B58.

 

And more (optional plugins recommended):

Tablet and Avitab integration (it's necessary Avitab plugin)

3jcabin-sounds package ready to fly with B58 (It's necessary 3jcabin-sounds plugin)

X-RAAS config file made and tested. (It's necessary X-RAAS plugin)

Checklist in format Clist.txt (It's necessary Xchecklist plugin)

I recommend the XPrealistic payware plugin. 

 

How to install:

This mod needs the original B58 from Laminar Research (X-Plane 11) to work properly.

It's full compatible with XP12 but the B58 base must be from XP11.

You can download only the section that you like and unzip it separately overwriting the necessary files of the original Baron B58

All files .zip have to be unziped into the root folder of your B58 aircraft

---

Happy flights!

---

 

 G1000 1

G1000 2

G1000 3

G1000 and Avitab Integration

YOU NEED TO HAVE AN ACTIVE ACCOUNT TO DOWNLOAD THIS FILE


 

 

winglets1

winglets2

winglets3

G1000 and Avitab integration with winglets

YOU NEED TO HAVE AN ACTIVE ACCOUNT TO DOWNLOAD THIS FILE


 

 

  

g58 3

lights1

lights3

More powerful landing and taxi lights

YOU NEED TO HAVE AN ACTIVE ACCOUNT TO DOWNLOAD THIS FILE

 

 

 cabin1

cabin2

cabin3

 Leather and wood textures for you cabin with better materials for the pilot and copilot

YOU NEED TO HAVE AN ACTIVE ACCOUNT TO DOWNLOAD THIS FILE

 

 

 Seats more confortable

YOU NEED TO HAVE AN ACTIVE ACCOUNT TO DOWNLOAD THIS FILE

 

 

 

 Prop1

prop2

prop3

New prop disc with more realistic graphics

YOU NEED TO HAVE AN ACTIVE ACCOUNT TO DOWNLOAD THIS FILE

 

Extras

Livery XPE with steel (Metalness)

FSEconomy alias

3jCabinSounds for G58 and X-RAAS configuration (needs 3jCabinSound and X-RAAS Plugin )

Checklist (needs XChecklist plugin)

 

Changelog

2.0

Garmin 1000 sounds like the Cessna G1000 from Laminar.

Modular zips. All sections can be downloaded separately. 

1.9

New panel menu with buttons adapted to G58 real version. Now with YD (Yaw Damper) button near AP button.

1.8

New flaps parameters, lift coefficient (CL) drag coefficient(CD) and pitching moment (CM) revised and improved.

1.7

New Airfoils. Airfoils tested using XFLR5 and exported and scaled with Polar2Afl. Airfoils data are much more accurate than the default B58 uses. Thanks to Zeta (Alejandro Zuluaga) for this work!

1.6

Better taxi and landing lights. 

New version without winglets (with and without winglets into the same pack).

1.5.1

Solved some bugs with textures.

1.5

Ghost zones over the iPad erased.

1.4.1

New prop disc with more realistic graphics.

1.4

Autopilot Garmin GFC 700 like real Beechcraft G58, with Garmin G1000 NXi

AP Heading AHRS

Altitude alert approaching 1000 feet from pre-select

Altitude alert departing 200 feet from select

Auto adjust CDI to GPS DTK (pilot and copilot)

1.3

New Avitab display, now more realistic with dirt

FSEconomy alias added

3jCabin-sounds with some optimized ranges

1.2

G1000 alt inner knob works down and up

Autopilot VVI select step size = 100 ft

Autopilot altitude select step size = 100 ft

Radio altitude select step size = 100 ft

Altitude pre-select is always armed

1.0

Initial release

  

Remember the installation procedure, you need unzip the zip file over Laminar Research B58 (from XP11) overwriting the necessary files